If you’re experiencing problems with your GPU fan speed, you might be wondering how to change it in your BIOS. In this article, we’ll show you how to do just that.
Table of Contents
What are the different fan speeds?
There are different fan speeds that can be set in a computer’s BIOS to adjust the airflow around the graphics card. This is usually used to lower the temperature of the graphics card, as Fan speeds increase airflow, which can cause the computer to overheat. However, lowering fan speed may also reduce system performance.
The default fan speed for most graphics cards is around 1000 rpm. Some graphics cards allow other speeds to be set, such as 1400 rpm or even 1800 rpm. These higher speeds will increase airflow and help to cool the card faster but may also reduce system performance.
To change the fan speed in a computer’s BIOS:
1) Turn on your computer and wait for it to boot up.
2) Once your computer has booted up, locate the BIOS settings by pressing a key during startup and selecting “Enter BIOS” from the boot menu.
3) In the BIOS settings, find the “Graphics” tab and look for a setting called “Fan Speed” or “GPU Fan Speed.”
4) Change the fan speed by selecting an appropriate number from 1000 rpm to 1800 rpm or 1400 rpm to 2000.
How to change GPU fan speed in bios – step by step guide
If you are experiencing loud noise from your video card or your GPU fan is not spinning at the desired speed, adjusting the fan speed in your computer’s BIOS may help. This guide will show you how to change the fan speed in your system’s BIOS.
Before you begin, make sure that your video card and motherboard are properly connected to your power supply.
- Turn on your computer and press the “F2” key to enter the BIOS.
- On the main screen, go to “Advanced” and select “Fan Speed Control.”
- In the “Fan Speed Control” window, you will see three options: “Auto,” “Manual,” and “PWM.”
Auto mode allows your computer to control the fan speed based on your CPU temperature. Manual mode lets you set a fan speed manually from 1% to 100%. PWM mode lets you set a fan speed using a pulse width modulation (PWM) signal.
- Select “Manual” and press enter.
Conclusion
In this article, we will be discussing how to change the GPU fan speed in a computer’s BIOS. By adjusting the fan speed, you can adjust how much air is circulated to the graphics card and improve cooling performance. If your graphics card is getting too hot and throttling your processor, adjusting the fan speed should help to address that issue.
Read Also:
Is There A Theoretical Reason Why Bios Fan Curve Bypass Software?
How to take screenshots on stylo 6? Four Methods
How do I turn off Samsung health app? An in-depth guide
Where to Plug in Fans on Motherboard? A-Z Guide
How to Use the Microsoft Surface Pro for Programming?
Arun is a self-published author and blogger with a passion for sharing his knowledge and expertise on Tech with people who are looking to find the perfect content for their needs. He tries to furnish you with genuine content about gadgets & tech that can assist you with deciding whether a gadget is appropriate according to your requirements or not.
